SmallRig lift handle (lightweight) 4757

Selling point

1. Alai connection interface for camera rabbit cage with Alai interface on top
2. Lightweight design, weighing only 113g
3. All-body high-strength engineering plastic wrap, it feels gentle in low temperature environment, and does not freeze hands
4. With one Alai extension interface and two cold boot interfaces, expandable installation monitor and microphone

Copywriting

SmallRig lift handle (lightweight) 4757 is a lightweight rabbit cage lift handle designed for lightweight users.The product design tends to be a comfortable grip experience, abandoning the large number of expansion screw holes that will be blocked after grip and lose meaning.The grip area is completely wrapped with plastic to avoid the cold touch to the operator when used in low temperature environments and make it more comfortable to use.

Adaptability

Suitable for all camera rabbit cages with Alai expansion interface on top

Specifications

Material: aluminum alloy, nylon

Product weight: 113G

Packaging weight: 163g±5g

Product size: 126*72*23mm

Packaging size: 155*81.5*42mm

Load bearing: 15Kg

Connection interface: Alai interface

Extended interface: 1 X Alai extension interface; 2 X cold boot interface

SmallRig fast card chute lift handle 4175B

Selling point

1. Standard chute interface, snap-in installation, locking as soon as you break, faster and safer.

2. It can adjust 80mm from front to back to balance the center of gravity of the equipment and improve shooting stability

3. Built-in multiple expansion interfaces to meet the needs of multi-scenario expansion

Such as 1/4”-20 threaded hole, 1/4”-20 positioning hole, Alai positioning hole, cold shoe interface, etc.

4. Built-in magnetic hexagon wrench for easy disassembly and assembly

5. With slider (length: 50mm)

SmallRig fast card chute lift handle 4175B is designed to assist in mobile shooting, enhance low-angle mobile shooting stability, facilitate device carrying, and provide rich expansion interfaces.The handle adopts a snap-in installation design, aligning the slide groove with the standard slider, installing it with one latch, and can be installed as soon as possible, without disassembling other accessories, saving shooting time; the lock is reinforced by pressing the wrench, which is stable and shaking.The handle part is lengthened, with a length of 134mm, and it still retains enough grip space after installing the accessories; the handle can be adjusted 80mm from front to back to balance the center of gravity of the equipment; the handle has a variety of expansion interfaces, such as 1/4”-20 threaded holes, 1/4”-20 positioning holes, Alai positioning holes, cold boot interfaces, etc., which can expand the monitor brackets 2905 and 2903, ball head magic hand 3875, fill lights, microphones and other accessories.Built-in magnetic hexagon wrench for easy adjustment of adapters.A 50mm slider is included, which can be installed by two 1/4"-20 screws with a spacing of 9mm or 18mm.

Note: Please push the wrench to the unlocked position first, and then install the handle

Adaptability

1.Slide: 1/4"-20 threaded hole with 9mm or 18mm pitch

2. Handle: expansion frame, expansion board, etc. of standard sliders

packing list

Handle x 1

Slider x 1

Product parameters

Product size: 134 x 78 x 31.6mm

Packaging Size: 181 x 102.5 x 41mm

Product weight: 204.7g±5g

Packaging weight: 264.7g±5g

Main materials: aluminum alloy

related products

2905,2903,3875,4017

Smallrig adjusts the handheld (Alai interface) 4153

Selling point:

1. Comfortable grip, providing a comfortable and stable handheld shooting experience
2. 2. The handle part is lengthened, and enough grip space is still retained after the accessories are installed.
3. The handle can be adjusted front and rear or the center of gravity of the kit can be expanded
4. Built-in multiple interfaces, such as 1/4”-20 threaded hole, 1/4”-20 positioning hole, Alai positioning hole, cold boot interface, etc., to meet the needs of multi-scenario expansion
5. Built-in magnetic hexagon wrench for easy disassembly and assembly

text

Smallrig adjusts the handheld (Alai interface) 4153It is designed to assist in low-angle shooting and provide a comfortable and stable handheld shooting experience.The handle is ergonomic and has a comfortable grip.The handle part is lengthened, with a length of 134mm, and it still retains enough grip space after installing the accessories; the handle can be adjusted by moving the Alai connector back and forth, with an adjustment range of 80mm; the handle has a variety of expansion interfaces, such as 1/4”-20 threaded holes, 1/4”-20 positioning holes, Alai positioning holes, cold boot interfaces, etc., which can expand the monitor brackets 2905 and 2903, ball head magic hand 3875, fill lights, microphones and other accessories.The Alai locking screw has built-in reinforcement holes and can be reinforcing the lock with a built-in hex wrench.Built-in magnetic hexagon wrench for easy disassembly and assembly.

Adaptability

Expansion frames, expansion boards, etc. with built-in Alai interface

packing list:

Handle x 1

Product parameters

Product Size:134.0 x 68.3 x 27.8mm

Package Size:155.0 x 81.5 x 42.0mm

product weight:156.0g±5g

Package weight:192.2g±5g

Main material:Aluminum alloy

related products

3765, 1955, 1984, 2905, 2903, 3875

Model 3766

Selling point:

1. Ergonomic design, comfortable grip, and reduce arm load

2. The handle uses an aluminum alloy body, embedded with silicone, which is anti-slip and anti-freeze

3. Hollow lightweight design, weighing only 124g

4. Built-in 5 cold boot interfaces, which can expand microphone, photography light, monitor and other accessories at the same time

5. Sliding chute interface, quick removal and time saving

text:

SmallRig chute-mounted handheld (basic version) 3766 is designed to assist low-angle shooting and reduce the burden on the arm; the handle is ergonomic, comfortable to hold, embedded with silicone, anti-slip and anti-freeze; hollow-out lightweight design, weighing only 124g; 3 cold boots are built into the front end of the handle, and 2 cold boots are built into the rear end, which can expand the microphone, photography light, monitor and other accessories at the same time; Alai positioning holes are built into the front end and top, which can connect the monitor brackets 2903 and 2348 to achieve screen monitoring; multiple 1/4"-20 threaded holes are built into the top and sides of the handle, which can connect to the Magic Hand 2070 expansion monitor, and can also be matched with the remote control 2924 to control the recording function of some cameras; the chute interface is adapted to standard slide NATO, which can realize quick disassembly and assembly.

Precautions:

1. The handle does not contain sliders, it is recommended to purchase 1409 and 2172
2. Maximum load bearing 10kg

Adaptability:

Equipment with slider interface

Include:

1 X Playing

Product Size:135 x 24.5 x 72.5mm

Package Size:156 x 83 x 43mm

product weight:124g±5g

Package weight:179g±5g

Material:Aluminum alloy, silicone, stainless steel

Related products: 2903, 2905, 2924, 1409, 2172, 2439, 3260, 3764, 3813

Model: 3764

Selling point:

1. Ergonomic design, comfortable grip, and reduce arm load

2. The handle uses an aluminum alloy body, embedded with silicone, which is anti-slip and anti-freeze

3. Hollow lightweight design, weighing only 129g

4. Built-in 5 cold boot interfaces: can expand microphone, photography light, monitor and other accessories at the same time

text:

SmallRig cold boots on the handheld (basic version) 3764 is designed to assist in low-angle shooting and reduce the burden on the arm; the handle is ergonomic, comfortable to hold, embedded with silicone, anti-slip and anti-freeze; hollow-type lightweight design, weighing only 129g; 3 cold boots are built into the front end of the handle, and 2 cold boots are built into the rear end, which can expand the microphone, photography light, monitor and other accessories at the same time; Alai positioning holes are built into the front end and top, which can connect the monitor brackets 2903 and 2348 expansion monitors to achieve picture monitoring; multiple 1/4"-20 threaded holes are built into the top and sides of the handle, which can connect to the Magic Hand 2070 expansion monitor, and can also be matched with the remote control 2924 to control the recording function of some cameras; the locking screws have wrench reinforcement holes for easy disassembly and assembly.

Precautions:

Maximum load -bearing 5kg

Adaptability:

Equipment with hot shoe/cold shoe connector

Include:

1 X Playing

1 x hexagon wrench

Product Size:135 x 24.5 x 72mm

Package Size:156 x 83 x 43mm

product weight:129g±5g

Package weight:182g±5g

Material:Aluminum alloy, silicone, stainless steel

Related products: 2903, 2905, 2924, 2094, 3766, 3814, 3813, 3468, 3286

Model: 3765

Selling point:

1. Ergonomic design, comfortable grip, and reduce arm load

2. The handle uses an aluminum alloy body, embedded with silicone, which is anti-slip and anti-freeze

3. Hollow lightweight design, weighing only 124g

4. Built-in 5 cold boot interfaces: can expand microphone, photography light, monitor and other accessories at the same time

text:

SmallRig Alai Portable (Basic Edition) 3765 is designed to assist in low-angle shooting and reduce the burden on the arm; the handle is ergonomic, comfortable to hold, embedded with silicone, anti-slip and anti-freeze; hollow-out lightweight design, weighing only 124g; 3 cold boots are built in the front end of the handle, and 2 cold boots are built in the rear end, which can expand the microphone, photography light, monitor and other accessories at the same time; Alai positioning holes are built in the front end and top, which can connect the monitor brackets 2903 and 2348 expansion monitors to achieve picture monitoring; multiple 1/4"-20 threaded holes are built in the top and sides of the handle, which can connect to the Magic Hand 2070 expansion monitor, and can also be matched with the remote control 2924 to control the recording function of some cameras; the locking screws have wrench reinforcement holes for easy disassembly and assembly.

Precautions:

Maximum load bearing 10kg

Adaptability:

Expansion frame with Alai positioning hole

Include:

1 X Playing

1 x hexagon wrench

Product Size:135 x 24.5 x 74.3mm

Package Size:156 x 83 x 43mm

product weight:124g±5g

Package weight:179g±5g

Material:Aluminum alloy, silicone, stainless steel

Related products: 2903, 2905, 2924, 2165, 3786, 3764, 3766, 3814, 3813

SmallRig Mini Threaded Handle HTS2756B

Selling point

1. Design for small cameras such as micro-single and card machines

2. Provide a comfortable handheld shooting experience

3. Compact handle, compact and lightweight

4. With Alai Positioning Hole

5. Anti-cold-removing boots on the top

text

SmallRig Mini Threaded Hand-On Hand-Own HTS2756B is locked on the rabbit cage with two 1-4"-20 anti-detachment screws, improving hand-held shooting comfort. The compact handle design is convenient for storage and carrying external shots, solving the core hand-holding needs. The front end of the handle has an Alai positioning hole, which can be connected to external accessories such as the Alai monitor bracket 2903B; the top is equipped with anti-detachment boots, external microphone and other equipment, which can prevent accidental falloff. The handle can be stored in the bag with the camera and the rabbit cage without disassembly; it is small and light, weighing only 79g.

Precautions:

This handle is smaller. If your hand size is larger, please purchase other handles

Adaptability

Small cameras such as micro-single and card machines

packing list

1 X handle

1 x hexagon wrench

Product parameters

Product size: 85 x 23 x 55.5mm

Packaging Size: 106 x 82.5 x 42.5mm

Product weight: 79g±5g

Packaging weight: 133g±5g

Material: aluminum alloy

related products

3764, 3765, 3766, 1638C, 1446C, 3813, 3814, 3847

SmallRig threaded on hand 1638C

Selling point:

1. Full shape and comfortable grip

2. Multiple interfaces, infinite expansion:

Built-in cold boots, Alai positioning holes, 1/4"-20 threaded holes, 3/8\'\'-16 threaded holes, which can expand microphones, photography lights, monitor brackets, magic hands and other accessories

3. Threaded interface, strong versatility

SmallRig threaded on-hand portable 1638C is designed to assist in low-angle shooting and reduce the burden on the arm.The handle is full and has a comfortable grip;

A cold boot is built in the front end of the handle, which can expand the microphone, photography light, monitor bracket 2905, etc.; an Alai positioning hole is built in the rear end, which can connect the monitor bracket 2903 expansion monitor to realize picture monitoring; multiple 1/4"-20 threaded holes and 3/8\'\'-16 threaded holes are built in the top and both sides, which can connect to the Magic Hand 2070 expansion monitor, and can also be matched with the remote control 2924 to control the recording function of some cameras; the threaded interface is highly versatile.

Precautions:

1. Maximum load-bearing 10kg

Adaptability:

Adapt 2 1/4"-20 threaded holes with center distance of 27~36mm

packing list:

1 X Playing

1 x hexagon wrench

2 x 1/4"-20 screws

Product parameters

Product size: 127.2 x 70 x 48mm

Packaging Size: 145 x 104 x 57mm

Product weight: 158g±5g

Packaging weight: 228g±5g

Main materials: aluminum alloy

related products

2903, 2905, 2924, 2070, 1984, 1446, 3766, 3765, 3814

SmallRig Universal Ale Portable 2165C

Selling point

1. Provides standard Alai positioning interface, stable and fast
2. Ergonomic design for comfortable finger curve fit
3. Integrated half-pack design, rich expansion interface

text

SmallRig Universal Ale Handle 2165C is a universal integrated semi-enclosed handle.The handle is ergonomic, with a simple shape and a curve fitting to the fingers, providing a comfortable handheld shooting experience; the Alai interface is convenient for users to disassemble and assemble quickly, and the positioning pin can be replaced and installed horizontally and vertically, which facilitates users to secure and stable fix the camera; the handle is designed in half, and provides multiple 1/4"-20, 3/8" -16 threaded holes, Alai positioning holes, and 3 cold boot interfaces are convenient for external monitors, fill lights and microphones; the cold boot interface at the front end of the handle has an anti-detachment design to prevent accidental drop of accessories; the handle is built-in wrench, which facilitates users to disassemble or reinforce accessories; this handle is light and practical, providing users with flexible and changeable expansion interfaces and comfortable shooting experience.

Precautions:

Please use a wrench to strengthen the locking screws to prevent loosening

Adaptability

Expansion frame with Alai positioning hole

packing list

1 × handle

Product parameters

Product size: 135 x 24.5 x 74mm

Packaging Size: 155 x 80 x 40mm

Product weight: 137g ± 5g

Packaging weight: 192g ± 5g

Materials: aluminum alloy, stainless steel

related products

2903B, 2905B, 2924, 2916, 3765, 3764, 3766, 3847