Smart electric window opening system
Features of electric window opening: The principle of electric window opening is that the automatic window has a driving system device, and the embedded software system will help you control the window.Usually, you don’t have to be so troublesome at home. Like TVs and air conditioners, the automatic window is specially equipped with a remote control. You don’t have to get up when you sit on the sofa. Just press the button and the window will automatically open.The use of automatic window device has changed the previous behavior of opening windows, and solved the problem that high windows cannot be opened. The corresponding control system can automatically execute pre-set commands to open or close the window when ventilation and heat dissipation inside the building is needed.Especially when a fire occurs, more time is provided for the affected personnel and rescue personnel.

1. Electric sunlight and smoke exhaust skylights are suitable for buildings that mainly focus on lighting and supplementary ventilation;
2. When it is fully opened, the smoke exhaust volume is relatively large, and the opening angle of the three-shaped sunroof is 30-90°;
3. The upper surface of the electric lighting and smoke exhaust sunroof is parallel to the installation surface and has a small wind resistance coefficient;
4. The electric lighting smoke exhaust sunroof window frame material is made of aluminum alloy profile, with tensile strength of 160N/mm2, yield strength of 110N/mm2, hardness of HV≥58., and wall thickness of 1.4.

5. The electric daylighting and smoke exhaust sunroof lighting materials can be selected as laminated glass, polycarbonate daylighting board, glass fiber polyester daylighting board, etc.When selecting light materials, indicate the lighting materials;

Materials and properties of the skylight:
The electric daylighting smoke exhaust sunroof uses 0.6mm thick colored steel plate cold-bending molded internally filled polyurethane foam material with thermal conductivity less than or equal to 0.25W/m.k. The sealing material is connected by self-drilling and self-tapping screws with low temperature resistant ethylene propylene rubber material sealing strips.
The opening part of the electric lighting smoke exhaust sunroof is made of aluminum alloy profiles, with tensile strength of 160N/mm, yield hardness of 110N/mm, hardness of HV≥58, and wall thickness of 102mm.
The lighting materials for the sunlight exhaust skylight are non-colored polycarbonate lighting panels (sunboards). The lighting panels and other materials should be explained when selecting colored materials.
All hardware and standard parts must be treated with anti-corrosion.
Opening and closing control method of sunroof:
1. The electric window opening machine uses 220V AC power supply, and the opening and closing time is 6-8 seconds.
2. The opening and closing of the skylight should be controlled in groups, and the number of skylights in each group is less than or equal to 12.
3. Three control methods of sunroof: general control method, intelligent control method, and intelligent network control method.
All of the above control methods can be controlled in a fire-fighting manner.

1. Parallel to the roof to reduce wind pressure and typhoon invasion
2. FRP independent construction without leakage
3. Simple lighting and ventilation integrated molding, low cost and good effect
4. The steel frame structure is easy to manufacture, and the existing factory can be constructed immediately
5. Customized to solve the situation of bad edge collection
6. Built-in gutter, beautiful appearance, excellent integrity
7. Install the motor to automatically turn off, keep the heat and prevent condensation.