Product parameters

Product model: LJC-142

Product material: ABS+electronic component+silicone 

Product power: 1.5W
Battery capacity: 1200mAhhh

Battery model: 18650 lithium battery

Working voltage: 5V

Work current: 1000mA

Charging voltage: DC5V

Charging current: 1000mA

Charging time: about 3HRS

Use time: warm white light 10HRS/colorful light 9HRS about 9HRS

Charging instructions: During the charging, the red light flash/full charging, the red light is long and bright

Product specification

Product size: 10.6×11.2×13.6CM

Product weight: 0.33kg (Mao weight)

Packing specification

Number of packing: 60pcs

Outer box size: 57.5×49×45CM

The weight of the whole box: 20kg (Mao weight)

The volume of the whole box: 0.13cbm

Instructions for use

1. Before using this product for the first time, please charge.(Can be charged with a charging treasure with equal voltage)

2. Power switch description: Press the switch, the light is bright (the color is warm white); press the switch again, and the light is destroyed.

3. Moisture changes in the shooting product: When the power switch is turned on, the light is warm white, the first shot, the light colorful three seconds of gradient; the second shot, the light color stays in the color when the shooting is shot;, Lights destroy; the fourth shot, warm white light, repeated cycle.

4. When the lighting is turned off, the product is still working, and there is a static current.If you do not use it for a long time, use the switch to turn off the light to reduce the battery loss.

5. After full charging, please cut off the power in time.

Use suggestions

Children under 1.6 years of age need to be used under adult care.

2. Do not disassemble the internal device by yourself to avoid damaging the parts.

3. When not in use for a long time, place the product in a dry environment.

4. The light source of this lamp is non -replaceable; when the light source reaches its life, the entire lamp should be replaced.

5. Please use it on the countertop at a tilt of less than 6 degrees to prevent dumping.

6. Due to lighting and display color deviations, it may cause the picture to be slightly deviated with the physical color. Please refer to the real object.