【Buyer must read】:
1. The front membrane or the posterior membrane is not indicated in the link option, and it is the front membrane.
2. The thickness of the non -indicated film is 0.26mm, which is the 2.5D arc surface to indicate the curved surface or plane default.
3. If the mobile phone is a curved or 2.5D curved screen (such as iPhone7/OPPO R9s, etc.), no full screen coverage is not marked in the option, or the indication of non -full screens is a non -full -screen film that can only be attached to the plane!IntersectionIntersection
【Packaging Configuration】:
1. Die chip configuration; tempered film + pearl cotton bag
2. Packaging configuration: packaging box + film + pearl cotton bag + alcohol bag + dust removal sticker

Product Features:

1. Imported materials .pet material, do not leave the gum, develop and develop the characteristics of the mobile phone.

2. The surface of the protective film is treated with abrasion -resistant and anti -scratching treatment, which is absolutely ultra -wear -resistant.

3. The protective film is processed by UV prevention to prevent the damage of UV to the LCD screen.

4. It can reduce the reflector by 90%. The light transmission rate is 99%, the screen is clear and realistic, and the air bubbles are not easy to produce during the film.

5. The principle of electrostatic adsorption is completely adopted, making the paste more simple, it is not easy to produce bubbles, it is easy to unveil, and can be pasted repeatedly

6. Three layers high, send protection cloth and packaging.

Instructions for use:

1 First compare the size of the film and the screen, and then install it. You need to keep a certain gap on the edge of the screen;

2 Wipe the screen with the included cleaning cloth to remove dust, fingerprints, and oil stains;

3 Use the No. 1 tag to tear about 1/3 of the bottom film, paste the surface to the bottom, please avoid touching the paste of your fingers;

4 Align the edge of the screen, gently paste from top to bottom, slowly tear off the film of the No. 1 mark and fit it on the screen from left to right. When pasting, please try to slowly and make sure that the sticking is good to avoid bubbles. If there are bubbles, you can use a credit card sticker to push the bubbles away, or you can use a cleaning cloth to squeeze it to the edge of the screen. If there are many bubbles, you can remove the patch and re-pat. Use your nails to gently lift a corner of the film and tear off the re-pat;

After 5, use No. 2 label paper to remove the surface release film, turn on the machine to inspect and complete.

common problem:

1 There is dust: Put the membrane on the transparent tape and stick it to clear the dust and hair fiber on the membrane;

2 There is a bubble: tear the membrane to the position of the bubble, and then put down and re -adsorb;

3 Paste crooked: tear the membrane up, restart the adsorption, start the inspection, complete.