Small [Round] Jellyfish

Product size: 80*80*218mm

Color box size: 88*85*225mm

Product weight: 300g (hairy weight), 200g (net weight)

Number of packing: 50 PCS

Drunted size: 44*44*47cm   

Back weight: 15.3kg (Mao weight)

Instructions for use

Switch method: button switch

Power supply method: USB power supply/3 section 7 battery 7 (battery shipment is not available)

Small [square] jellyfish lamp

Product parameters

Number of packing: 50pcs

Outer box size: 45×42×50CM

The weight of the whole box: 20.1kg

Steps

1. Remove the screws on the battery box at the bottom of the product and install it with 3 seven batteries or USB plug -in.

2. Remove the lid on the top of the container and add water. Do not fill the container too much, leave a gap of 5-10mm on the top of the container.

4. Take out the product accessories (water mother/jelly/volcanic bead). Before putting in the container, apply a small amount of detergent on the accessories.

5. Put the lid back to the top of the container to ensure no gaps and prevent water from overflowing.

6. Press the front switch on the front of the product, the lights are on, and the volcanic beads repeatedly emerge or jellyfish swim.The product starts to work.

Note: If the jellyfish does not move, please check if there is a bubble below the jellyfish.If you have a long appliance, gently bubble the air bubbles from the jellyfish.

Instructions for use

1. Do not use the charging battery.

2. Stay away from water and keep dry.

3. Do not use the adapter. It is recommended that battery use or original USB cable connection.

4. When not in use for a long time, take out the battery or pull off the external power plug, wipe or dry it and put it in the original packaging box.

5. Cut off the power before cleaning, just scrub the soft cloth when cleaning.Do not put the entire product in water and clean it!

6. Do not disassemble the body component without authorization. If you find damage, please ask the company's professionals to replace it.